Extended Performance Premium Industrial Lubricant
Sigma is a leading manufacturer and deliverer of reliable premium Industrial lubricants that meet the highest engine recruitments. We are specialized in formulating Industrial lubricant considering anti-rust, wear, corrosion and foaming. Our advanced formula guarantees maximum engine protection including clutch and gear-box in high or low temperatures.
Heat Transfer Oil Supplier in Bangladesh
Heat Transfer oil is high performance fluid based on premium quality mineral oils with supreme additives package that ensure high thermal stability, standard initial boiling point (IBP), low viscosity and provide workable fluid heating & good pump circulation with secure extended life of oils.
Heat transfer oil is generally recommended for enclosed circulated system for mostly industrial applications like as process industry, chemical plants, textile producers as well as food, plastics, timbers, metal industries & laundries also where waste heat is extracted from flue gases. Furthermore, this oil is not recommended for use in open systems where hot oil is exposed directly to the air. If oils spray or escape from leakage points, hot oils may spontaneously ignite.
Health and Safety:
Heat transfer oil is unlikely to present any significant of health or safety hazard when properly used & apply recommended applications with maintained good standards of personal hygiene. Use impervious gloves during handling & avoid contact oil with skin. After skin contact washes immediately with soap & water. To prevent environmental pollution do not discharge it into drain, soil or water. For any query please visit-www.sigma-oil.com
Features and Benefits:
- Excellent fluidity and high heat transfer properties due to low viscosity;
- Resists oil cracking due to low vapor pressure also minimizes the formation of volatility;
- Resists oxidation and thickening due to highly refined virgin mineral oils.
- Heat Transfer oil is non-corrosive & has high solvency that reduces deposit formation with keep clean of internal surfaces of heat exchangers.
Typical Physical Properties:
|Name||Method||Units||Heat Transfer Oil ISO 32|
|Density at 15⁰c||ASTM D1298||Kg/m3||0.8535|
|Density at 30⁰c||ASTM D1298||Kg/m3||0.8444|
|Flash Point, COC||ASTM D92||⁰c||222|
|Viscosity At 40⁰c||ASTM D445||cSt||30.77|
|Viscosity At 100⁰c||ASTM D445||cSt||5.51|
|Viscosity Index||ASTM D2270||-||117|
|Pour Point||ASTM D97||⁰c||-15|
|Neutralization Value||ASTM D974||mgKOH/g||0.5|
Heat Transfer Industrial Engine Oil
Sigma Oil Industry has been manufacturing many types of Industrial oil for the convenience of the Industrial riders. Our aim is to give you a better product that is also fuel-efficient in nature. You should pick our Industrial engine oil for the following reasons: